Old roof removal
Old metal panels, trim and fasteners are removed so the structure can be inspected.
Metal Roofing
Metal Roof Replacement Dumont, NJ
A Dumont roofer can tear off an old metal roof, re-cover it with new metal or replace a shingle roof with metal, after checking the framing and decking underneath. Call (551) 374-2031 to reach a local roofer.
A metal roof needs replacing when the metal itself is failing, not just the screws. When panels are perforated by rust, the finish is gone and every screw hole has been enlarged by years of movement, repairs stop keeping up. Older galvanized roofs with little coating left are the common candidates.
There are a few ways to replace a metal roof, and the right one depends on what is underneath. Tearing off lets the roofer see rotten purlins, soft decking and rusted fasteners before anything new is installed. A re-cover, or retrofit, installs new metal over the old panels on new sub-framing, which is common on shops and large buildings.
Plenty of homeowners replace an old shingle roof with metal rather than more shingles. The shingles can come off or, if local code permits and the deck is sound, the metal can go over them. It helps to know what is on the roof now, how old it is and whether it has ever been covered over.
Depending on what the roofer finds, metal roof replacement in Dumont, NJ can go hand in hand with metal roof installation and metal roof repair.
Looking for Dumont metal roof replacement? Call (551) 374-2031 to reach a nearby roofing contractor.
Call nowThe process
What happens during a metal reroof
Here is how a metal replacement usually goes.
Check the framing
The roofer counts rust-through spots, checks the finish and inspects the purlins or decking from inside the attic or building. The findings shape the replacement plan.
Pick the system
The new system is selected, whether exposed fastener or standing seam, and the method of replacement is settled. Switching to standing seam usually means adding solid decking.
Strip the panels
Panels and trim come off section by section and go to a metal recycler. Sections are opened only when they can be dried in that day.
Restore the deck
Framing and sheathing damaged by old leaks are replaced before new metal goes on. New screws in rotten wood would fail within a few seasons.
Put on the new roof
New underlayment, eave trim, panels, ridge cap and flashing complete the replacement. Every edge gets new matching trim.
What is included
What metal roof replacement includes
New panels
New panels in the chosen profile, gauge and finish is fastened to the manufacturer pattern.
New trim
All new eave, rake, ridge and wall trim so the details last as long as the panels.
Retrofit framing
A retrofit re-cover avoids a tear-off with fasteners driven into the structure below.
Deck repair
Damaged structure is repaired before any new metal is installed.
Related service
Metal Roof Panel Replacement Dumont, NJ
Panel replacement is the middle ground between a patch and a full metal roof replacement. On exposed fastener roofs, the roofer removes the screws on the damaged panel and the overlapping edges of its neighbors, slides it out and sets a new one in sealant. Standing seam panel swaps are possible but slower, since the seams on both sides have to be opened.
Many Dumont roofs need only a few panels replaced after a storm or a falling limb. Color matching is the main limit, since new paint looks brighter than weathered panels. Once a large share of panels need work, replacement becomes the better plan.
Related service
Metal Roof Over Shingles Dumont, NJ
A metal roof over shingles skips the tear-off and installs panels over the current shingle layer. Many codes allow it over a single layer of shingles, and the metal usually goes on over new underlayment, a slip sheet or wood battens.
The catch is that the decking stays hidden. For Dumont homes, the attic check is critical, since rotted decking will not hold fasteners. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
Around Dumont, metal reroofs range from rusted farm buildings to houses getting their first standing seam roof. From Dumont out to neighboring towns such as Haworth, New Milford, Bergenfield and Cresskill, older metal roofs tend to need full replacement once the coating is gone, and newer houses are adding metal as their shingle roofs wear out, so it pays to have the framing checked before deciding on a re-cover.
Searching for metal roof replacement near me from Dumont or Haworth, New Milford, Bergenfield and Cresskill? Call (551) 374-2031 to talk to a roofer who works in your part of town.
Roofs in this climate
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Dumont, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why act early
Drier ceilings
Small roof problems caught early usually stay small repairs.
Roofers who know Dumont
Roofers in Dumont know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Metal Roof Replacement FAQ
When does a metal roof need replacing instead of repair?
The answer depends on how much of the metal is still sound. Rust holes in many panels, a finish worn to bare metal and screw holes that will not hold new fasteners all point toward replacement. Call (551) 374-2031 to have a roofer check the roof and the structure.
Can a metal roof be installed over shingles?
Local code decides whether metal can go over existing shingles. The upside is skipping tear-off, while the downside is not seeing the decking. A roofer can tell you which option fits your house.
What is a metal roof retrofit?
In a retrofit, new panels go over the old roof on spacers or purlins. The method is popular on commercial buildings and large outbuildings. The framing must be sound enough to support both layers.
Is old metal roofing recycled?
Removed metal panels are generally recycled. Unlike shingles, which usually go to a landfill, metal is sorted and sent for recycling. Your roofer can explain how the old metal will be hauled away.
Can I replace just one damaged metal panel?
One panel can usually be swapped without redoing the roof. The screws and laps are freed, the bad panel slides out and a new panel of the same profile is lapped in with sealant and new fasteners. Concealed fastener panels are possible but slower to replace.
More questions? Call (551) 374-2031
Other services that may help
Metal Roof Installation
New metal roofs in standing seam, exposed fastener, metal shingle and stone coated steel, for homes, garages and outbuildings.
Learn moreMetal Roof Repair
Repairs for leaking fasteners, open seams, rusted panels and failed flashing on a metal roof, matched to exposed fastener and standing seam roofs alike.
Learn moreRoof Replacement
Replacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreStanding Seam Metal Roof
Standing seam metal roofs with concealed clips, raised seams and no exposed screws in the panels, with matching trim, closures and snow guards.
Learn more
Looking for something else?
See all roofing servicesNeed metal roof replacement in Dumont, NJ?
Call now for Dumont metal roof replacement and help in the towns around it.